Installation process of insulation ceramic module lining of trolley furnace 1

Installation process of insulation ceramic module lining of trolley furnace 1

Trolley furnace is one of the furnace types with the most refractory fiber lining. The installation methods of refractory fiber are various. Here are some widely used installation methods of insulation ceramic modules.

insulation-ceramic-module-1

1. Installation method of insulation ceramic module with anchors.
Insulation ceramic module is composed of folding blanket, anchor, binding belt and protective sheet. Anchors include butterfly anchors, angle iron anchors, bench anchors, etc. These anchors have been embedded in the folding module during the production process.
Two heat-resistant alloy steel bars are used in the middle of the insulation ceramic module to support the whole module, and the module is fixed firmly by bolts welded on the steel plate of the furnace wall. There is a seamless close contact between the furnace wall steel plate and the fiber module, and the entire fiber lining is flat and uniform in thickness; The method adopts single block installation and fixation, and can be disassembled and replaced separately; The installation and arrangement can be staggered or in the same direction. This method can be used for module fixation of furnace top and furnace wall of trolley furnace.
Next issue we will continue to introduce installation process of insulation ceramic module. Please stay tuned!


Post time: Mar-06-2023

Technical Consulting